EVGA motherboard boot problems using Nvidia RTX 50 GPUS; See solution

Boot problems in EVGA Mother Plates When using models of GPUs NVIDIA RTX 50 were resolved by users with Application of a tape to connection pins.

The gambiarra is the mother of the bold and needy, especially when the official roads do not seem to embrace the demands of their customers. And this is the makeshift solution that some EVGA motherboard users have applied to their Nvidia RTX 50 GPUS to make them work.

RTX 50 faces EVGA motherboard startup problems

The problem regarding EVGA’s motherboard boot when using Nvidia RTX 50 GPUS was discussed at the Team Evga Forum on Reddit. The user MurkyIncident He talked a little about the issue and presented a punctual and makeshift solution -aka Gambiarra -but that solved the problem to several users, which basically consists of covering two pins of GPU PCIe connector with adhesive tape to silence any unwanted communication.

The startup problem lies in extra smbus pins in various EVGA motherboards, which create a conflict when combined with Nvidia GPUS.

“Corte uma tira de 2 mm de largura de fita isolante elétrica (Kapton altamente recomendada). Em seguida, aplique sobre os pinos 5 e 6 na parte frontal do conector PCIe da GPU. A Thermal Grizzly vende a fita em folhas plásticas, que são fáceis de cortar no tamanho certo. Certifique-se de que apenas os dois pinos SMBUS estejam cobertos, nada mais. Pronto. Reinstale a placa e aproveite.” - MurkyIncident, no fórum do reddit

According to Murkyincident, this solution works because “SMBUS PIE Pins are fully optional and do not have a defined pattern of use. Most consumer motherboards don’t even care about connecting them. However, EVGA has connected these pins to its Z690 plates, allowing the GPU to interfere with boot (probably during RAM)”The user loses nothing by isolating the SMBUS GPU of the motherboard.

EVGA has been facing a drastic reduction in its activities since 2022, when it has removed itself from the GPUS market, claiming conflicts with Nvidia. This action impacted all its commercial operations, considerably reducing its operational staff. As a result, maintaining an update schedule and consistent support for its users has been very difficult, with various records of complaints from its users: “EVGA is a shadow of what it was before and getting BIOS updates for hardware compatibility problems is how to teeth teeth“It lamented one of them.”They basically left their customers in hand over their motherboards.”

If you are one of these users and did not know what was happening, at least now you have a provisional solution to your boot problems. To better check out the discussion about this problem, you can check out the forum on Reddit where the solution was presented (Source Link).

Fonte: Reddit